Table of Contents
ToggleIntroduction
Maintaining consistent throughput and tight formulation accuracy is vital for modern compounding and extrusion lines. Choosing the correct loss in weight feeder setup ensures raw materials enter the extruder barrel without rate fluctuations or formula drift.

Dosing raw polymer resins, additives, liquid plasticizers, or reinforcement fibers requires selecting between volumetric and gravimetric (loss-in-weight) feeding mechanisms. Choosing the wrong unit leads to quality issues, material waste, or unneeded equipment costs.
This technical guide compares volumetric and loss-in-weight feeder designs, operational mechanics, accuracy thresholds, and system integration strategies for high-output extrusion processing.
Deep Dive: Volumetric Feeder Explained
Setting up an efficient extruder feeding system starts with understanding your basic dosing options.
How it Works
A volumetric feeder meters material based on physical volume over time. The system uses a rotating screw, auger, or belt running at a controlled speed to discharge a constant volume of resin per revolution.

Volumetric units assume constant material bulk density. They rely on manual calibration to convert screw RPM into an estimated mass discharge rate (kg/h).
Pros & Cons
- Pros: Low initial investment, mechanical simplicity, compact footprint, and straightforward maintenance requirements.
- Cons: Cannot compensate for bulk density changes, material bridging, or screw packing. Accuracy drops when handling cohesive powders, regrind, or hygroscopic materials.
Best Suited For
Volumetric units work well for single-component extrusion, consistent virgin pellets with stable bulk density, and budget-sensitive secondary dosing applications where minor rate variations do not compromise final product quality.
Deep Dive: Loss-in-weight Feeder Explained
How it Works
A loss-in-weight feeder places the entire feeder assembly—hopper, screw drive, and motor—on high-precision digital load cells. A closed-loop PLC controller continuously measures total weight loss over time.

The controller dynamically adjusts screw motor speed to maintain the mass flow rate setpoint. It automatically corrects for bulk density variations, hopper fill levels, and material viscosity changes in real time.
Pros & Cons
- Pros: High accuracy (±0.2% to ±0.5%), automated self-diagnostics, real-time mass flow tracking, and seamless integration with complex multi-component compounding recipes.
- Cons: Higher initial equipment investment, sensitivity to external plant vibrations, and requirement for flexible connections at the discharge port.
Best Suited For
Gravimetric units excel in multi-component compounding, masterbatch dosing, engineering plastic manufacturing, flame-retardant formulations, and continuous twin screw extrusion lines demanding strict quality compliance.
Volumetric vs. Loss-in-weight Feeder Options
| Feature / Metric | Volumetric Feeder | Loss-in-weight (Gravimetric) Feeder |
| Control Parameter | Speed / Screw Volume | Actual Mass Weight over Time |
| Accuracy Level | ±2% ~ ±5% | ±0.2% ~ ±0.5% (High Precision Gravimetric Dosing) |
| Self-diagnostic capability for material bridging and clogging anomalies | None(unable to detect material bridging or dry running) | Available(monitors abnormal weight loss in real-time and triggers alarms) |
| Material Types | Free-flowing, stable pellets | Powders, fibers, liquids, cohesive materials |
| Initial Cost | Budget-friendly | Premium investment |
Granuwel’s Integrated Feeding Strategy for Twin Screw Extruders
Integrating a high-performance extruder feeding system with main extruder screw controls requires robust system integration and PLC programming.
- Seamless System Integration: Granuwel links loss-in-weight feeder controllers directly to the main twin screw extruder PLC via industrial Ethernet protocols (Profinet/EtherCAT). If raw material supply drops or bridging occurs, the main extruder automatically adjusts screw speed to prevent starvation or pressure spikes.
- Smart Control Interlocking: For complex compounding recipes involving multiple ingredients, Granuwel arranges loss-in-weight feeders in a matrix array. The central control system locks all dosing units together. If any feeder experiences material starvation, the entire dosing array scales down proportionally to preserve recipe ratios.
- Custom Modular Dosing: Granuwel provides modular dosing units equipped with interchangeable single-screw and twin-screw agitators, anti-bridging vertical agitators, and quick-clean hopper designs tailored for powders, micro-pellets, and liquid additives.
Conclusion
Deciding between a volumetric feeder and a high-precision loss in weight feeder depends on material characteristics, recipe tolerances, and quality requirements. While volumetric options offer a low-cost entry point for simple pellet feeding, gravimetric loss-in-weight systems provide the control needed for modern compounding operations.
Granuwel delivers complete turnkey dosing solutions, custom feeder arrays, and integrated control systems for compounding lines worldwide. Contact Granuwel’s technical team today to select the ideal feeder setup for your facility.