Optimizing SBS/EVA Pelletizing: A Guide to Cooling Process Selection

Introducción:

In the field of non-PVC elastomer pelletizing for products like eraser stationery, both water-cooling and air-cooling strand pelletizing processes have their ideal applications. This article presents a real customer trial case to objectively analyze the characteristics of both processes, helping you select the most economical and efficient production method based on your material properties.

1. Process Selection: Matching Material Characteristics is Key

In the sectors of stationery, toys, and various daily goods, non-PVC elastomers are highly favored for their eco-friendliness, non-toxicity, and excellent flexibility. Formulas based on SBS and EVA, filled with a high percentage of calcium carbonate, are ideal materials for manufacturing products like erasers and pencil grips due to their superior feel, moldability, and cost-effectiveness.

Erasers
elastomer particles

Erasers and elastomer particles

For pelletizing such materials, the two primary processes are water-cooling strand pelletizing y air-cooling strand pelletizing. Each has its own features and application ranges. Producers need to make scientific choices based on material properties and production requirements.

2. Customer Case Background: Seeking a Production Optimization Solution

Recently, a customer specializing in high-end eraser stationery sought to optimize their production process. They sent their SBS/EVA compound with high calcium carbonate filler to our lab for testing. Having previously used water-cooling strand pelletizing, the customer wanted to evaluate the effectiveness of the air-cooling process for their specific material.

3. Objective Comparative Analysis of the Two Processes

CaracterísticasWater-Cooling Strand Pelletizing ProcessAir-Cooling Strand Pelletizing Process
Core PrincipleImmersion quenching through a water tankCooling via an air-cooling conveyor belt
Ideal ApplicationGeneral-purpose plastics (PP, PE, ABS, etc.), engineering plastics, materials insensitive to moistureMaterials sensitive to moisture (e.g., PC), flexible elastomers (e.g., SBS, TPE), high-filling formulations
Cooling MethodImmersion cooling in water tank, high cooling efficiencyAir convection cooling, gentle cooling process
Drying RequirementRequires drying equipment to remove surface moisture after pelletizingPellets are dry upon discharge, no secondary drying needed
Equipment SetupRequires water circulation system and drying systemSimplified process, eliminates drying step
Water cooling
Water cooling
Air cooling
Air cooling

4. Trial Results: Excellent Performance of Air-Cooling Process on Eraser Compounds

Using our combination of co-rotating twin-screw extruder and air-cooling strand pelletizer, the customer’s high-filled SBS/EVA material demonstrated the following characteristics:

  1. Stable Production Process: Strands maintained good flexibility on the air-cooling conveyor with no breakage.
  2. Excellent Pellet Quality: Produced uniform, dense pellets with smooth and rounded surfaces.
  3. Simplified Production Process: Discharged pellets were dry and ready for packaging, eliminating the drying step.
  4. Significant Energy Savings: No need for water circulation or drying equipment, reducing energy consumption.

5. Professional Advice: How to Choose the Most Suitable Process

Based on our technical experience, we offer the following recommendations:

1. Scenarios where Water-Cooling Strand Pelletizing is recommended:

    • Materials insensitive to moisture.
    • High-volume production requiring extreme cooling efficiency.
    • Factories with existing complete water treatment equipment.
      Twin screw extruder with water cooling strands pelletizing system
      Twin screw extruder with water cooling strands pelletizing system

      2. Scenarios where Air-Cooling Strand Pelletizing is recommended:

      • Flexible elastomer materials like SBS, EVA.Pelletizing production with high-filling formulations.Materials sensitive to moisture.

        • Production lines seeking to simplify processes and reduce energy consumption.
          Twin screw extruder with air cooling strands pelletizing system
          Twin screw extruder with air cooling strands pelletizing system

          6. No Single Best Process, Only the Most Suitable Solution

          This customer trial once again verified the importance of matching the process selection to the material characteristics. For high-filled elastomers like those used in eraser stationery, air-cooling strand pelletizing demonstrated its unique advantages, but this does not negate the value of water-cooling for other materials.

          As a professional extrusion equipment manufacturer, we advise producers to fully consider factors such as material properties, output requirements, investment budget, and operational costs when choosing a pelletizing process, in order to select the production scheme most suitable for their specific needs.


          Looking for the optimal pelletizing solution for your material?

          Welcome to bring your material samples to our factory for a free trial! Our professional technical team will provide an objective process evaluation and design an optimized solution to help you make an informed decision.

          Granuwel – Focused on Providing Professional Extrusion and Pelletizing Solutions

          Formulario de consulta

          Formulario de consulta

          Complete el siguiente formulario para contactarnos y recibirá una respuesta nuestra dentro de las 12 horas.

          Utilizamos cookies para habilitar todas las funcionalidades para un mejor rendimiento durante su visita y para mejorar nuestros servicios al brindarnos una idea de cómo se utiliza el sitio web. El uso continuado de nuestro sitio web sin haber cambiado la configuración de su navegador confirma su aceptación de estas cookies. Para obtener más información, consulte nuestro política de privacidad.